Many families will choose to install marble tiles for countertops in their homes. Whether it's on the bathroom countertop or the kitchen countertop, marble tiles can be found almost everywhere because it's very easy to clean and has a very good decorative effect. Marble tiles are also very affordable. So, what is the best way to install marble tile kitchen and bathroom worktops on a tight budget? Exactly what should you look out for when installing marble tile worktops in your bathroom and kitchen? Hanseceramictile provides a step-by-step guidance on how to install marble tile countertops in the most efficient manner possible.
What Is the Best Way to Install Marble Tile Countertops in the Bathroom and Kitchen - Low Cost Marble Tile Countertop Installation
Tiling a bathroom or kitchen counter can transform the space into a versatile workspace. Follow the step-by-step instructions for installing marble tile countertops in your bathroom or kitchen, using just simple tools that you most likely already have at home.
1. Remove the current countertops and raise the cabinets to a more level position.
The first step in installing a marble bathroom or kitchen countertop is to remove the existing countertops and ensure that your cabinets are flat, level, and securely fastened to the wall. Because stone countertops are hard and would crack if they are made to flex, a flat surface is essential for successful installation. If your cabinets are not flat and level when you start, you can make minor modifications later on by placing shims under the countertop. Depending on the situation, it may be necessary to remove and reinstall the cabinetry.
2. Kitchen and bathroom marble countertops should be measured.
The next step is to produce a wood template. Carefully measure the top of the cabinets and use those measurements to cut a wood template out of 5/8′′ inch thick plywood. Test fit the plywood template and make further cuts until it is properly aligned with the countertops. This wood template should be extended from the wall to the edge of the countertop, and it will serve as a template as well as a support for the final installation of the stone countertop on the counter top surface.
3. Make use of the template to advertise the marble for use in a cutting machine.
Use the plywood template to mark the marble for cutting, making sure to account for the manufactured edges of the marble, which will need to overhang the plywood and cabinets to be effective. You'll also want to mark the location of the sink hole, and as a side note, be sure to get prefabricated marble that has already been polished on the edges, otherwise the project will become significantly more difficult.
4. Diamond blades are used to cut marble tile countertops for kitchen and bathroom countertops.
After that, it's time to make some reductions. Cut the marble swiftly and cleanly with a turbo diamond blade; you can use an angle grinder if you like, but a circular saw with a larger blade will cut faster and stay cooler. If you're cutting thick stone, take your time and don't rush it; instead, apply consistent pressure and allow the blade do its work, or you'll end up damaging your blade and wasting your time. Put water on the tile after that, as this will aid in speeding up your cutting process and decreasing the amount of dust produced. A respirator, ear protection, and eye protection are all required when cutting any type of stone, such as marble, so make sure you have all of the necessary safety equipment on hand.